In addition to developing our own systems and tools, Ardyne work with selected suppliers of industry best technology, to provide tried and tested solutions for P&A, Slot Recovery/Re-entry, and Workover applications.
Combining this best in class existing equipment with Ardyne’s independent service capability and knowledge transfer options, we offer reliable conventional fishing services in addition to our own niche technology, to bring our customers a full range of options to suit their operations.
Ardyne sells and services a range of whipstocks and accessory equipment to suit customer requirements.
Ardyne offers standard conventional retrieval equipment in smaller sizes, for thru-tubing recovery and removal through tubing,
Multi string Cutters utilizes internal pump pressure to activate crushed Carbide or Carbide Inserts coated knives to cut single or multiple strings of pipe from 5″ to 36″ OD.
Series 70 HD Overshot
Series 70 Heavy Duty (HD) Overshot is especially designed to engaged the exposed portion of a fish too short to be engage with conventional Overshots. The HD Overshot design nearly doubles the maximum pull force on fish compared to Standard Overshots.
Series 150 HD Overshot
Series 150 Heavy Duty (HD) Overshot engages, Pack-off and Packs off before pulling the fish. The HD Overshot is manufactured with a high quality material therefore withstanding extremely heavy pulling. The HD Overshot design nearly doubles the maximum pull force on fish compared to Standard Overshots.
HD Heavy Duty Spear
HD Hydraulic Heavy Duty Spear is designed to assure positive internal engagement with the fish. It is built to withstand extreme pulling force. It engages the fish over an extra large area without damage or distortion of the fish. It releases from the fish with differential pressure
HD Releasing Spears is designed to assure positive internal engagement with the fish. It is built to withstand extreme pulling force. It engages the fish over a large area without damage or distortion of the fish. Also available in Standard type (STD).
HD Spear Stop sub is designed to convert a flush type Releasing Spear to a Shoulder type Releasing Spear. It is installed above the Releasing Spear when the use of a positive stop is desired or required. Wellbore’s design has a shearable stop ring to reduce friction between stop ring and top of fish if required when releasing downhole from fish.
Spear Pack-off sub is attached below the Releasing Spear to pack off inside the fish in order to circulate through the fish.
The HD Lubricated Bumper Sub is designed to withstand sustained bumping action in Fishing operations. The tool permits a ± 18″ vertical stroke. Working pressure are 10.000 psi.
Standard Fishing Bumper Sub is a relative inexpensive durable Bumper sub for use in Fishing and Cutting operations. The tool permits a 20″ to 60″ vertical stroke.
The Surface Bumper Jar is installed in the drillstring at the surface and is used whenever the downhole Fishing String becomes stuck and requires a heavy downward force to release.
The Drilling Jar is installed in the Fishing string above the HD Lubricated Bumper Sub. Used whenever the downhole Fishing String becomes stuck and requires a heavy downward or upward impact to release.
Marine Swivel are used with Wellbore Multi String Cutters for cutting Casing and Conductors from Floating Vessels and Semi-submersible Drilling Rigs.
Stabilizers are normally used in combination with Mills and Multi string Cutters to center BHA in well bore.
Packer Milling and Retrieving tools are design to mill away Packer slips without damaging the casing and retrieve in the same run.
Pilot Mills are used to mill Tubing, Liner Hangers and Casing. Long full OD blades extend life and ensures that Couplings are milled in same operation.
Junk Mills are primarily used to mill away metal objects in the hole that cannot be retrieved. Junk mills comes in various design with crushed Carbide and Inserts.
String and Water Melon Mills with spiraled blades are used to mill out collapsed area in Casing and as secondary Mills in a Clean out BHA. Designed with crushed Carbide and Inserts.
Taper Mills are used primarily in front of Cutting and Spear BHA. Taper Mill is also design to mill out collapsed area in Casing. Design with crushed Carbide and Inserts.
A GAS-TIGHT METAL-TO-METAL SEAL SYSTEM, WHICH MAKES THE PRODUCING WELL SEALED AND SECURE
Ardyne provides an expandable linerhanger system which serves as a barrier element in new or old producing wells.
Our XPak linerhanger system is ISO V0 qualified which makes the producing well tight and secure. The TIW XPak liner hanger and packer is designed to run with standard liner applications for all well environments. Industry proven expandable technology provides a liner top anchor and sealing device that is unmatched in the industry. The XPak system secures tripping and maintains low ecd while circulating for optimal cementing results.
The XPak Liner Hanger system allows a short expanded section to create a metal seal liner top / anchor that is unmatched in the industry. The slim profile design, with no external parts allows increased bypass area while tripping and cementing. The setting and releasing mechanism is straightforward and simple securing high success ratio.
FlowBoss Surge Reduction Tool allows the fluid being displaced up the inside of the liner to be diverted back to the annulus above the liner top. Reduces surge and risk of fracking formation while allowing faster tripping and saving time.
To benefit from original expertise, optimise your operations, cut costs and reclaim rig time, call us on +44 (0)1224 452600 or fill in the form below